Other

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

- AL6061 alloy construction - Non-keyed design - Jar of 20 spacers

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

22.2mm shim kit to mount control levers. Slater bars are 19mm diameter. The shim kit allows for standard 22.2mm brake, shift and dropper post levers to be used.

- Cartridge Bearing - 1-3/8-inch Outer Diameter

RockShox XLoc Parts

Flat Mount Disc Caliper Bracket Bolts

TT Brake Lever Hardware Kit

Replacement dropout screws for the Surly Cross Check. - Bolt length: 40mm

- Surly Chain Tensioner part

Surly Chain Tensioner part

- Replacement slider for the Surly Tuggnut and Snuggnut

- Replacement thumb screw for the Surly Tuggnut/Snuggnut

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

- Ahead Stem Shim allows the use of 1-1/8 stem on 1" steerer tube - 28.6mm/25.4mm

- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm

Surly bearing adjust caps for Mr. Whirly and OD

Origin8's Twistr 15mm Top Cover is a high profile 15mm top cover for Origin8 Twistr Series headsets. This CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings.

• Aluminum clamp with a chromoly bolt

- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10

Replacement LH cup for English threaded European bottom brackets. - Cup Material: Steel

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

KS Dropper Post Service Parts

KS Dropper Post Service Parts

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

• For use with externally routed road frames

Chrome plated heat treated bolt - Forged steel conical wedge - For 1-inch steer tubes

Threaded headset keyed locknut washer - Bag of 10

The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.

Secu Clip Safety Release for Full Fenders is used on the SKS Chromoplastic Longboard Fenders and some Bluemel/Commuter II Fenders. The Safety Release must be used with full fender sets to prevent accidents if a foreign object gets stuck between the fender and the front wheel. Made in Germany

RockShox cable and hose guide.

RockShox hydraulic hose guide.

Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes

X01 Eagle Cable Anchor Kit

Chainring Bolt Kit - 4 Arm Single with Aluminum Guard

- Chain Ring Bolt Kit 4-arm Triple

- Truvativ Crank arm bolt, M12, Capless, For Howitzer, Bag of 2

- Plastic bar end plug pair for 22.2mm extensions

Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.

Trek proprietary suspension hardware. - Refer to Service Manual for assembly instructions and service - Sold individually

46 x 55 x 51 x 152mm

Actuators are at the bottom of the post and convert the cable pull to open the piston, allowing the dropper to move.

- Axle mount rear derailleur guard - Essential for children`s multi-speed bikes

- Replacement M5 lock nut for cable anchor bolts, fender bolts, etc. - Bag of 10

- Rust-resistant coating - M8x16mm - Shell: 8mm flanged axle bolt - Includes 2 bolts

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Heavy duty bolt-on aluminum seatpost clamp.

Dimension Seatpost Binder Bolts - 16g

- Missing links to make chain installation, maintenance and reparation easier - Card of 2