How great would life be if you could drive to the beach every day and surf? With SeaSucker’s Board Rack, we can at least help you get the board there. Our rack attaches to the roof of just about any car with our super-strong 6-inch SeaSucker vacuum mounts. That means no clips, no bars, and no hassle. Pump the rack on and strap the board down – it’s that easy. This rack is made to carry up to two surf or paddle boards. The rack consists of two 31-inch Starboard bars; the front bar has four 6-inch vacuum mounts and the back two. Bar pads and 10-inch nylon cam-buckle straps are included.
2019 Model Bomber comes standard with our Universal Huske Fork Mount upgrades, 9mm plugs and quick release skewers. The Bomber is our 3-bike behemoth. It’s a fork-mount-style rack, with five of our powerful 210 lb pull-strength rated vacuum cups holding it onto your car’s roof, trunk or back glass. Three Rear Wheel Straps for securing the back tires are included. Incredibly easy to install, and removes in just seconds. Fits on virtually any car. Minimal assembly required. Specifications: - Holds 3 bicycles – up to 45 lbs each. - Made for roof top, trunk or hatchback attachment. - Attaches to metal, glass or fiberglass surfaces. - 3/4inch thick high-density polyethylene (HDPE) body for strength and durability. - Three heavy-duty fork mounts for 9mm dropouts. - Five 6-inch SeaSucker vacuum cups on body (210 pound pull-strength rated each). - Approx. 41-inch x 11-inch footprint. - Approx. 17 pounds What’s in the box: - Bomber 3-bike rack with standard 9mm fork mounts. - Three Rear Wheel Straps. - 5g Lube Tube for vacuum pump maintenance. - Spare SeaSucker vacuum pad and pump. - Crank Arm Strap.
Finally, an upright-bike carrier that’s easy to install and won’t damage your car! SeaSucker's Bomber bike rack features their incredibly strong vacuum mounts allowing you to temporarily and securely mount your bikes to the roof or trunk without the hassle of permanently attaching any hardware. SeaSuckers are non-marking, UV- and weather-resistant, and hold exceptionally well to glass, metal or fiberglass surfaces. They're made of 3/4-inch high-density polyethylene, which is tough and strong enough to hold your bikes and flexible enough to follow the curve of your roof line. The Bomber holds your bikes with 3 of their heavy-duty Delta Bike Hitch Pro fork mounts. They open wide enough when you release the lever that you don’t have to tighten or loosen the acorn nut on the opposite side every time you put your bike in or take your bike out of the mount. Plus, the Deltas lock, too. For the back of your bikes, and to keep the tails from sliding left or right, there are another 3 SeaSucker vacuum mounts with 6-inch, hook-and-loop Rear Wheel Straps. The Bomber attaches to your car via 5 6-inch diameter SeaSucker vacuum mounts (210 pound-rated pull strength each). It's designed to mount to your roof and front windshield, but can be used just about anywhere – on the roof, on the trunk, etc. It holds bikes up to 45 pounds each.
2019 Komodo, the most beautiful bike rack in the world? We certainly think so. This road-bike-specific rack is machined out of solid aluminum so that each part fits with precision. Anodized in a variety of colors; Black, Silver, Aqua Blue, and Gold. This rack is designed for sports cars and convertibles – cars that don’t have a lot of open space to attach a rack, but this beauty can be used on any car. - Minimum footprint: 18-inch x 13-inch. - Tail folds up for compact storage. - Each of the four individual vacuum cups articulates so the rack makes a solid connection even with irregular mounting surfaces. - Sorry, mountain bike lovers, Seasucker doesn't have a version of the Komodo for you yet.
2019 Model Mini Bomber comes standard with our Universal Huske Fork Mount upgrade, with 9mm plugs and quick release skewer. The Mini Bomber is probably our most versatile model. This 2-bike fork-mount rack is designed to attach to your car’s roof, trunk, or your SUV’s back glass. The HDPE body flexes to conform to your car’s curves. With four 6-inch SeaSucker vacuum mounts, this rack has plenty of muscle. Fits on virtually any car. Minimal assembly required.
Our new roof rack system designed for extreme versatility & portability. The Monkey Bars are 48-inch round aluminum cross bars that allow for a multitude of attachments, such as kayak, ski, board, bike & cargo. Powered by 6-inch SeaSucker vacuum cups (4 up front and 2 in the rear), the Monkey Bars fit on just about any car with a roof. Have a wide or narrow roof? No worries, the vacuum cups can be moved to any position on the bar to ensure a perfect fit for any vehicle. Our folding option allows bars to break down from 48-inch to 24-inch for travel and storage.
Paddle boards, surfboards, even kayaks are no problem for this unit. Seasucker has put extendable bars (24-inch to 44-inch range) on their super-strong 6-inch SeaSuckers to make a roof-top rack system that holds it all. The front bar has two SeaSuckers on each side, and the back has one SeaSucker on each side, so you know you’ve got a solid connection with this rack. Comes with 22-inch wrap-around pads on each bar and two 10-inch straps for lashing down your boards, plus a spare SeaSucker (just in case) and a 5g serving of Lube Tube for maintenance. Some assembly may be required.
This is a single 6-inch SeaSucker vacuum mount with a 1 1/2-inch wide hook-and-loop strap. When mounted to your vehicle it secures your bike's rear wheel and keeps the bike from moving left or right.
Our Ski Rack is the easiest way to get your gear to the mountain. Powerful 6-inch SeaSucker vacuum mounts hold the front and a back locking carriers and are hinged to accommodate the curve of your roof for easy mounting. Soft rubber padding inside the carriers safely grip your skis or snowboards without scratching them. Each carrier section locks closed (2 keys included) and has a large push button for easy opening. Each carrier has 24-inch of holding space.
We made this one especially for you three-wheelers. Two platforms with wheel hooks plus a wheel strap for the rear wheel holds the trike secure on a car’s roof. Like all SeaSucker racks, it attaches and removes in seconds and fits on virtually any car (except convertibles, you really need a roof to attach this one to). What’s in the box: - Two trike platforms with wheel hooks. - Rear Wheel Strap. - 5g Lube Tube for vacuum pump maintenance. - Spare SeaSucker vacuum mount.
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface - Holds thicker, taller loads with a higher vertical edge - Compatible with Yakima crossbars only - Works well when paired with Heavy Duty Straps (sold separately) - Set of 4 brackets
Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).
-Extends the Mini Skinny by 14" -Integrated 9mm Fork Mount -Retains 50% of usable crossbar space -Locking roof bar mounts -Basket comes fully assembled
A premium, universal wheel fork for the new bike axle standards. The universal SpinVice clamp works on most crossbar shapes and is compatible with an SKS lock. - Folds down when not in use - Universal bar attachment with SpinVice clamps - Double wheel retention with axle and ZipStrips - Lockable to crossbars (accepts one SKS lock) - Works with all new wheel and axle sizes TECHNICAL SPECS - Weight: 2.30 lbs - Dimensions: L 19.00” x W 5.00” x H 9.00”
Whether you're headed out for the weekend or a coast-to-coast odyssey, Thule's Outbound is the perfect travel companion. This soft-sided, weather-resistant rooftop accessory is spacious enough to carry your entire family's vacation gear, and tough enough to protect it out there on the open road. The laminate material is rugged and highly weather resistant, and the padded base protects your car's finish. Heavy-duty, double-stitched straps attach the cargo bag to your roof-rack crossbars or raised factory rails. Twin compression straps keep the load stable, minimize abrasion and noise, and improve aerodynamics. When you've gotten back home, the Interstate folds down for compact storage.
One person can load and unload a boat with this unique retractable arm that fits inside your Thule load bars. - Supports up to 50% of the kayaks weight and prevents vehicle contact - Integrated load stop prevents boat from sliding off bar - Holds nearly every kayak shape and size - Fits Thule square bar rack system only
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)
Be the envy of all the boaters at the river with the EvenKeel's ingenious and thrifty saddle-style rooftop rack. Universal mounts fit nearly any crossbar right out of the box. And out of the box it comes with everything you need to haul your boat, including straps and bow/stern tie-downs. Sold in a set of 4.
The KeelOver attaches directly to any roof rack for a quick, tool-free assembly, right out of the box. Not only will your canoe arrive to the water safely, but youll get to spend more time on the water, making for many happy paddlers. - Universal design attaches to round, square, aerodynamic and factory bars with a single tightening knob - Includes canoe securing straps and bow / stern tie-downs ensuring you have everything needed for a single canoe - Durable over-molded rubber cushions the canoe gunwale while providing stability - Simple, tool-fee installation and assembly within minutes of opening the box - Dual bolts included to ensure an integrated fit to vehicle - Rubber padding protects your crossbars from damage or corrosion
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Fitting kit required for perfect fit of the roof rack to a specific car.
Traverse fitting kit required for perfect fit of the roof rack to a specific car. Compatible with Thule Traverse 480 and 480R Feet only.
Page 1 of 3 Next page